From: Gary Ring (garyring.work@gmail.com)
Date: Wed Jan 18 2006 - 11:04:58 GMT-3
Dave,
No. I think Brian was saying that the route-map should be removed bu the
redistribute connected statement under router ospf 1 will remain. Then, the
bri and ethernet interfaces' subnets will be redistributed.
Gary
On 1/17/06, Schulz, Dave <DSchulz@dpsciences.com> wrote:
>
> Brian -
>
> If he removes the route-map, won't this leave out the connected route
> that they are trying to redistribute?
>
>
> Dave Schulz,
> Email: dschulz@dpsciences.com
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Brian McGahan
> Sent: Tuesday, January 17, 2006 11:53 AM
> To: Quetta Walla; ccielab@groupstudy.com
> Subject: RE: IE v1 Lab 5. task 5.22 Redis bt rip-ospf
>
> Correct. Since the route-map has an implicit deny any other
> connected interface will be denied from redistribution. You can fix
> this by editing the route-map or just removing it.
>
> HTH,
>
> Brian McGahan, CCIE #8593
> bmcgahan@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987 x 705
> Outside US: 775-826-4344 x 705
> 24/7 Support: http://forum.internetworkexpert.com
> Live Chat: http://www.internetworkexpert.com/chat/
>
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > Quetta Walla
> > Sent: Tuesday, January 17, 2006 6:01 AM
> > To: ccielab@groupstudy.com
> > Subject: IE v1 Lab 5. task 5.22 Redis bt rip-ospf
> >
> > IE v1 Lab 5. task 5.22
> >
> > When redistributing between RIP and OSPF on R4, R4 solution says:
> >
> > router ospf 1
> > redistribute static subnets
> > redistribute rip subnets
> > redistribute connected subnets route-map connected-to-ospf
> > !
> > route-map connected-to-ospf per 10
> > match interface bri0/0
> > !
> > On the Ehternet 0/0 interface of R4 exists network 204.12.1.0 which is
> > speaking RIP with BB3. R4 is not redisdistributing this network in
> OSPF
> > because of the route-map connected-to-ospf
> >
> > For it to work, another route-map statement has to be added.
> >
> > route-map connected-to-ospf per 10
> > match interface bri0/0
> > !
> > route-map connected-to-ospf per 20
> > !
> > Or just add redistribute connected subnets under ospf 1.
> >
> > Any comments.
> >
> >
> > --
> > _______________________________________________
> >
> > Search for businesses by name, location, or phone number. -Lycos
> Yellow
> > Pages
> >
> >
> http://r.lycos.com/r/yp_emailfooter/http://yellowpages.lycos.com/default
> .a
> > sp?SRC=lycos10
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:49 GMT-3