Re: How to disable the "Last configuration change at xxx " in

From: James Ventre (messageboard@ventrefamily.com)
Date: Wed Jan 18 2006 - 09:13:26 GMT-3


I'm not using the "ntp master" command at all (and never have on this
device) .... and I get it:

ar1#sh run | inc ntp
ntp authentication-key 1 md5 [snip]
ntp authenticate
ntp trusted-key 1
ntp clock-period 14459944
ntp update-calendar
ntp server 10.7.0.1 key 1
ntp server 10.8.0.1 key 1
ar1#sh run
Building configuration...

Current configuration : 37912 bytes
!
! Last configuration change at 13:41:15 EST Mon Jan 9 2006 by Yousef
! NVRAM config last updated at 08:27:22 EST Tue Jan 10 2006 by Yousef
!

James

Schulz, Dave wrote:

  Interestingly, enough....I tried this in the lab....when you use the ntp
  master 3, you don't get the message, but when you use the ntp master 1
  ....then you get the message as Brian states. Going back to ntp master 3 or
  taking the ntp master off does not make the message go away. So, I am assuming
  that this will only go away after a reboot without the ntp master 1, but I
  can't test it at the moment.
  
  Dave
  
  -----Original Message-----
  From: nobody@groupstudy.com To: Brian Dennis
  Cc: Chan Hong; ccielab@groupstudy.com ; sh.law@pccw.com ; ivan.cl.tam@pccw.com Sent: 1/18/2006 2:31 AM
  Subject: Re: How to disable the "Last configuration change at xxx " in
  configuration?
  
  Really open up my @y@s.
  
  Thanks,

  On 1/17/06, Brian Dennis <bdennis@internetworkexpert.com> wrote:

    Here is how it is enabled:
    
    Router#sho run
    Building configuration...
    
    Current configuration : 809 bytes
    !
    version 12.3
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    !
    hostname Router
    !
    boot-start-marker
    boot-end-marker
    !
    !
    no aaa new-model
    !
    resource policy
    !
    ip subnet-zero
    !
    !
    ip cef
    no ip dhcp use vrf connected
    
    Router#conf t
    Enter configuration commands, one per line. End with CNTL/Z.
    Router(config)#ntp master 1
    Router(config)#^Z
    Apr 6 05:48:06.474: %SYS-5-CONFIG_I: Configured from console by

  console

    Router#sho ntp assoc
    
          address ref clock st when poll reach delay

  offset

    disp
    *~127.127.7.1 .LOCL. 0 0 64 177 0.0

  0.00

    125.0
     * master (synced), # master (unsynced), + selected, - candidate, ~
    configured
    Router#sho run
    Building configuration...
    
    Current configuration : 870 bytes
    !
    ! Last configuration change at 05:48:06 UTC Tue Apr 6 1993
    !
    version 12.3
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    !
    hostname Router
    !
    boot-start-marker
    boot-end-marker
    !
    !
    no aaa new-model
    !
    resource policy
    !
    ip subnet-zero
    !
    !
    
    Router#
    
    HTH,
    
    Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security) bdennis@internetworkexpert.com
    Internetwork Expert, Inc. http://www.InternetworkExpert.com Toll Free: 877-224-8987
    Direct: 775-745-6404 (Outside the US and Canada)

    -----Original Message-----
    From: nobody@groupstudy.com [ mailto:nobody@groupstudy.com ] On Behalf

  Of

    Chan Hong
    Sent: Tuesday, January 17, 2006 6:57 PM
    To: ccielab@groupstudy.com Cc: sh.law@pccw.com ; ivan.cl.tam@pccw.com Subject: How to disable the "Last configuration change at xxx " in
    configuration?
    
    Dear all,
    
      How to disable the "Last configuration change at xxx & NVRAM config
    last updated at xxx" in configuration? Following is the sample.
    
      Building configuration...
      Current configuration : 2203 bytes
    !
    ! Last configuration change at 10:54:09 HK Wed Jan 18 2006 <--
    ! NVRAM config last updated at 10:54:10 HK Wed Jan 18 2006 <--
    !
    version 12.3
    service timestamps debug datetime localtime
    service timestamps log datetime localtime show-timezone
    no service password-encryption
    !
    
    _______________________________________
     YM - Bw=u0T.'

  4N:b'A(S&3$W:t!A'A*:*B$M$4%i%H/d$U0T.'59'A!A7m'A$W:t.I4N/`%_'Y,](l!A%t&s

    ;!8\3#IN(+%"!C
         http://messenger.yahoo.com.hk

  _______________________________________________________________________

    Subscription information may be found at: http://www.groupstudy.com/list/CCIELab.html

  _______________________________________________________________________

    Subscription information may be found at: http://www.groupstudy.com/list/CCIELab.html

  _______________________________________________________________________
  Subscription information may be found at: http://www.groupstudy.com/list/CCIELab.html
  _______________________________________________________________________
  Subscription information may be found at: http://www.groupstudy.com/list/CCIELab.html



This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:49 GMT-3