From: Scott Smith (hioctane@gmail.com)
Date: Sat Jan 14 2006 - 21:37:32 GMT-3
It should...
Rack1R1#sh ip ospf nei
Neighbor ID Pri State Dead Time Address Interface
150.1.4.4 0 FULL/ - 00:00:28 155.1.146.4 OSPF_VL0
150.1.4.4 1 FULL/DR 00:00:33 155.1.146.4 Ethernet0/0
Rack1R1#sh ip ospf int
OSPF_VL0 is up, line protocol is up
Internet Address 0.0.0.0/0, Area 0
Process ID 1, Router ID 150.1.1.1, Network Type VIRTUAL_LINK, Cost: 10
Configured as demand circuit.
Run as demand circuit.
DoNotAge LSA allowed.
Transmit Delay is 1 sec, State POINT_TO_POINT,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
oob-resync timeout 40
Hello due in 00:00:07
Index 2/3, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 1, maximum is 1
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 150.1.4.4 (Hello suppressed)
Suppress hello for 1 neighbor(s)
IOS Version 12.2(15)T14.
I believe in previous versions IOS did not show this.
-Scott
On 1/14/06, Victor Cappuccio <cvictor@protokolgroup.com> wrote:
> Why, If OSPF Virtual Links are considered to be an Interface in Area 0, they
> do not appear in the show ip ospf neighbor and they do not appear also in
> the show ip ospf interface??
>
>
>
> Rack1R4#show ip ospf neighbor
> Neighbor ID Pri State Dead Time Address Interface
> 1.1.1.1 1 FULL/ - 00:00:32 136.1.41.1 Serial0.41
> 3.3.3.3 1 FULL/ - 00:01:51 136.1.234.3 Serial0.234
> 2.2.2.2 1 FULL/ - 00:01:54 136.1.234.2 Serial0.234
> 3.3.3.3 1 FULL/ - 00:00:34 136.1.43.3 Serial1
>
>
> Rack1R4#show ip ospf interface | in is up
> Serial0.41 is up, line protocol is up
> Loopback0 is up, line protocol is up
> Serial0.234 is up, line protocol is up
> Serial1 is up, line protocol is up
>
>
> Rack1R4#show ip ospf virtual-links
> Virtual Link OSPF_VL0 to router 3.3.3.3 is up
> Run as demand circuit
> DoNotAge LSA allowed.
> Transit area 34, via interface Serial1, Cost of using 64
> Transmit Delay is 1 sec, State POINT_TO_POINT,
> Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
> Hello due in 00:00:04
> Adjacency State FULL (Hello suppressed)
> Index 4/5, retransmission queue length 0, number of retransmission 0
> First 0x0(0)/0x0(0) Next 0x0(0)/0x0(0)
> Last retransmission scan length is 0, maximum is 0
> Last retransmission scan time is 0 msec, maximum is 0 msec
> Message digest authentication enabled
> Youngest key id is 1
> Rack1R4#
>
> Thanks
> Victor.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:49 GMT-3