From: n (cisco.wizard@virgin.net)
Date: Thu Jan 12 2006 - 14:07:14 GMT-3
Have you been through this paper?
http://www.cisco.com/warp/public/459/37.html
Where is the match statement and ACL in the config that your route map
calls?
Looks like 30 for examples 2 and 3.For example 1 you do not say if you have
a peering to 2.2.2.2
----- Original Message -----
From: "Maneesh Chawla" <coolmaneesh@gmail.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, January 11, 2006 11:56 PM
Subject: Redistribution
> Hi All,
> I have 3 questions on redistribution,
> 1. say , I do a
>
> router bgp 300
> redistribute isis metric 10 route-map r1
> route-map r1 permit 1
> set metric 20
>
> 2. Another case :
>
> router bgp 300
> redistribute isis route-map r1
> neighbor 2.2.2.2 remote-as 400
> neighbor 2.2.2.2 route-map r2 out
> route-map r1 permit 1
> set metric 20
> route-map r2 permit 1
> set metric 30
>
> 3. Last case :
>
> router bgp 300
> redistribute isis metric 10 route-map r1
> neighbor 2.2.2.2 remote-as 400
> neighbor 2.2.2.2 route-map r2 out
> route-map r1 permit 1
> set metric 20
> route-map r2 permit 1
> set metric 30
>
>
> Could anyone tell me what will be the MED of the routes going to 2.2.2.2.
>
> Thanks
> Maneesh
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:48 GMT-3