From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Wed Jan 11 2006 - 15:05:39 GMT-3
Joshua,
I'm not sure which specific features aren't supported in the
12.2T version, but 99% of them will be. What I would do for your home
lab if you have 2620s is just to boot the 12.2T Enterprise Plus image,
then for any features you can't configure mark them down and rent some
rack time to try them out.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Joshua
> Sent: Wednesday, January 11, 2006 11:38 AM
> To: ccielab@groupstudy.com
> Subject: Internetwork IEWB-RS V3.0
>
> Brians and guys,
>
> Is it possible to use 2620 instead of 3640 for R3, R4 and R5? If i
load
> the
> most possible IOS on 2620s by using tftpdnld, could i fulfill all
tasts
> listed in the workbook? What can not do?
>
> Thanks in advance!
>
> Joshua
>
>
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:48 GMT-3