RE: Running Layer-2 across Layer-3

From: David Prall (dcp@dcptech.com)
Date: Wed Jan 11 2006 - 13:18:38 GMT-3

• Next message: Chris Lewis: "Re: wrr-queue bandwidth command"
• Previous message: Kenneth Wygand: "Running Layer-2 across Layer-3"
• Maybe in reply to: Kenneth Wygand: "Running Layer-2 across Layer-3"
• Next in thread: Victor Cappuccio: "RE: Running Layer-2 across Layer-3"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

L2TPv3 should work for you. Bridging across a GRE tunnel, although not
officially supported. DLSW if it can support the application, it isn't just
for SNA.

David

--
David C Prall dcp@dcptech.com http://dcp.dcptech.com
  
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On 
> Behalf Of Kenneth Wygand
> Sent: Wednesday, January 11, 2006 11:11 AM
> To: ccielab@groupstudy.com
> Subject: Running Layer-2 across Layer-3
> 
> Hello everyone,
> 
> 
> 
> I have the following scenario:
> 
> 
> 
> (E0)R1(E1)<---->(E0)R2(E1)<---->(E0)R3(E1)
> 
> 
> 
> Layer 3 links everywhere. The requirement is to provide 
> layer-2 services
> for a non-routable protocol (unnamed) from R1's E0 interface 
> to R3's E1
> interface.
> 
> 
> 
> Any suggestions on how this can be accomplished?
> 
> 
> Thanks in advance,
> 
> Ken
> 
> ______________________________________________________________
> _________
> Subscription information may be found at: 
> http://www.groupstudy.com/list/CCIELab.html

• Next message: Chris Lewis: "Re: wrr-queue bandwidth command"
• Previous message: Kenneth Wygand: "Running Layer-2 across Layer-3"
• Maybe in reply to: Kenneth Wygand: "Running Layer-2 across Layer-3"
• Next in thread: Victor Cappuccio: "RE: Running Layer-2 across Layer-3"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:48 GMT-3