From: Vinayak Sudame (vdsudame@gmail.com)
Date: Tue Jan 10 2006 - 17:06:57 GMT-3
As you know Cisco 7000 is EOL and EOS.
http://www.cisco.com/en/US/products/hw/routers/ps332/ps5472/
"sh ver" usually show the memory capacity on the RSP7000. If you do a "sh
mem summ" that should show you the memory statistics. Similarly "sh proc
cpu" and "sh proc cpu" should show you the CPU statistics.
Some CCO links:
http://www.cisco.com/univercd/cc/td/doc/product/core/cis7000/routeswi/25617rs
p.htm#863
High CPU link:
http://www.cisco.com/warp/customer/63/highcpu.html#5a
Hope this helps.
Vinayak
On 1/10/06, Jens Petter Eikeland <jenseike@start.no> wrote:
>
> Hi group
>
> I have a cisco 7006 atm router that I need to check for capacity. What is
> a
> good way to go about this. Where do I start, and what do I check for. Do
> Cisco have anything that describes this, and what command would be good to
> use...
>
> Thanks in advance
>
> JP
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Cheers,Vinayak Sudame --------------------------------------------------------- Home Address: 405 Gray Marble Road Morrisville, NC 27560
(H) - 919-467-7262 (C) - 919-259-4385 -----------------------------------------------------------
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:48 GMT-3