From: CCIEin2006 (ciscocciein2006@gmail.com)
Date: Mon Jan 09 2006 - 18:22:22 GMT-3
Yes I am in normal config mode. Maybe its the IOS version?
On 1/9/06, Chris Atkins <chris_atkins@blueyonder.co.uk> wrote:
>
> were you in Vlan database mode if so try in normal conf t mode, works for
> me.
>
> version 12.1
> no service single-slot-reload-enable
> no service pad
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname Lab_S2
> !
> enable secret level 2 5 $1$UgGy$QvUo5y1FIDYCMJI3BisPj0
> !
> !
> vlan 10
> !
> vlan 20
> !
> vlan 30
> !
> vlan 40
> !
> vlan 50
> !
> vlan 990
> remote-span
> ip subnet-zero
> ip tcp synwait-time 5
> no ip domain-lookup
> !
> vtp domain ccie
> vtp mode transparent
> mls qos
>
>
> Cheers
>
> Chris
> ----- Original Message -----
> From: "CCIEin2006" <ciscocciein2006@gmail.com>
> To: "Cisco certification" <ccielab@groupstudy.com>
> Sent: Monday, January 09, 2006 9:01 PM
> Subject: VTP commands not shown in config on Cat3550?
>
>
> > Is there a reason why vtp configurations don't show up in the config?
> >
> >
> > Rack1SW1#sh run
> > Building configuration...
> >
> > Current configuration : 2815 bytes
> > !
> > version 12.2
> > no service pad
> > service timestamps debug uptime
> > service timestamps log uptime
> > no service password-encryption
> > !
> > hostname Rack1SW1
> > !
> > enable password cisco
> > !
> > no aaa new-model
> > ip subnet-zero
> > ip routing
> > no ip domain-lookup
> > !
> > !
> > !
> > !
> > !
> > !
> > no file verify auto
> > !
> > spanning-tree mode pvst
> > spanning-tree extend system-id
> > spanning-tree vlan 16 priority 24576
> > !
> > vlan internal allocation policy ascending
> > !
> > !
> > interface Loopback0
> > ip address 150.1.7.7 255.255.255.0
> > !
> > interface GigabitEthernet0/1
> > switchport access vlan 16
> > !
> > interface GigabitEthernet0/2
> > switchport access vlan 2
> > !
> > interface GigabitEthernet0/3
> > switchport access vlan 3
> > !
> > interface GigabitEthernet0/4
> > switchport access vlan 4
> > !
> > interface GigabitEthernet0/5
> > switchport access vlan 52
> > !
> > interface GigabitEthernet0/6
> > switchport trunk encapsulation dot1q
> > switchport trunk allowed vlan 16,36
> > switchport mode trunk
> > !
> > interface GigabitEthernet0/7
> > !
> > interface GigabitEthernet0/8
> > !
> > interface GigabitEthernet0/9
> > !
> > interface GigabitEthernet0/10
> > !
> > interface GigabitEthernet0/11
> > !
> > interface GigabitEthernet0/12
> > !
> > interface GigabitEthernet0/13
> > switchport trunk encapsulation isl
> > switchport mode dynamic desirable
> > !
> > interface GigabitEthernet0/14
> > switchport trunk encapsulation isl
> > switchport mode dynamic desirable
> > spanning-tree vlan 16 port-priority 112
> > !
> > interface GigabitEthernet0/15
> > switchport trunk encapsulation isl
> > switchport mode dynamic desirable
> > spanning-tree vlan 16 port-priority 96
> > !
> > interface GigabitEthernet0/16
> > !
> > interface GigabitEthernet0/17
> > !
> > interface GigabitEthernet0/18
> > !
> > interface GigabitEthernet0/19
> > !
> > interface GigabitEthernet0/20
> > !
> > interface GigabitEthernet0/21
> > !
> > interface GigabitEthernet0/22
> > !
> > interface GigabitEthernet0/23
> > !
> > interface GigabitEthernet0/24
> > switchport access vlan 63
> > !
> > interface GigabitEthernet0/25
> > !
> > interface GigabitEthernet0/26
> > !
> > interface GigabitEthernet0/27
> > !
> > interface GigabitEthernet0/28
> > !
> > interface Vlan1
> > no ip address
> > shutdown
> > !
> > interface Vlan7
> > ip address 136.1.7.7 255.255.255.0
> > !
> > interface Vlan57
> > ip address 136.1.57.7 255.255.255.0
> > !
> > router rip
> > version 2
> > network 136.1.0.0
> > network 150.1.0.0
> > no auto-summary
> > !
> > router bgp 200
> > no synchronization
> > bgp router-id 150.1.7.7
> > bgp log-neighbor-changes
> > neighbor 136.1.57.5 remote-as 200
> > no auto-summary
> > !
> > ip classless
> > ip http server
> > ip http secure-server
> > !
> > !
> > ip access-list standard CISCORO
> > ip access-list standard CISCORW
> > !
> > snmp-server community RO RO CISCORO
> > snmp-server community RW RO CISCORW
> > snmp-server location San Jose, CA US
> > snmp-server contact CCIE Lab SW1
> > snmp-server chassis-id 221-787878
> > snmp-server enable traps vtp
> > snmp-server host 136.1.2.100 CISCOTRAP vtp
> > !
> > control-plane
> > !
> > !
> > line con 0
> > exec-timeout 0 0
> > privilege level 15
> > logging synchronous
> > line vty 0 4
> > password cisco
> > login
> > line vty 5 15
> > password cisco
> > login
> > !
> > !
> > end
> >
> > Rack1SW1#
> > Rack1SW1#
> > Rack1SW1#show vtp status
> > VTP Version : 2
> > Configuration Revision : 0
> > Maximum VLANs supported locally : 1005
> > Number of existing VLANs : 15
> > VTP Operating Mode : Server
> > VTP Domain Name : IELAB
> > VTP Pruning Mode : Enabled
> > VTP V2 Mode : Disabled
> > VTP Traps Generation : Enabled
> > MD5 digest : 0xAE 0x7B 0xFD 0x55 0x53 0x5B 0x5B
> 0x5E
> > Configuration last modified by 136.1.7.7 at 3-1-93 01:36:15
> > Local updater ID is 136.1.7.7 on interface Vl7 (lowest numbered VLAN
> > interface found)
> > Rack1SW1#
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:48 GMT-3