From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Mon Jan 09 2006 - 13:03:06 GMT-3
Hello Group..
I have configured a very basic multicast topology, using a Sparse Mode. And
I was reading all the troubleshooting commands that we can find at
http://www.cisco.com/warp/public/105/57.html#showiprpf
But I do not get this output
RouterA#mstat 172.17.155.2 172.17.155.1 224.24.24.24
Type escape sequence to abort.
Mtrace from 172.17.155.2 to 172.17.155.1 via group 224.24.24.24
From source (?) to destination (?)
Waiting to accumulate statistics......
Results after 10 seconds:
Source Response Dest Packet Statistics For Only For Traffic
172.17.155.2 172.17.155.2 All Multicast Traffic From 172.17.155.2
| __/ rtt 8 ms Lost/Sent = Pct Rate To 224.24.24.24
v / hop 4 ms ---------------------
--------------------
172.17.155.2 ?
| \__ ttl 0
v \ hop 3 ms 0 0 pps 0 0 pps
172.17.155.1 172.17.155.2
Receiver Query Source
Ok the configuration is something like this
L0----RouterE ---------Etherner (172.17.155.0/24)----------- RouterA
Router E is the RP, and I have joined Ethernet 0 of Router E in group
224.24.24.24
But why 172.17.155.2 is repeated 2 times, is there any link that explains
this (mstat) a little more detail?
Thanks
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:48 GMT-3