From: Wang Dehong-DWANG1 (Dehong.Wang@motorola.com)
Date: Thu Jan 05 2006 - 00:03:16 GMT-3
I have some doubts with ipv ospf network < > and would like your
opinions on it. With frame relay, without changing ipv ospf network
type, hub is able to establish ospf adjacencies with two spokes.
Also, ipv os network point-to-point under loopback interface command
does not seem to change subnet either.. Are those ipv6 ospf anomaly or
there are something I mis-understood?
thanks.
- Dehong
R3#sh ipv os nei
Neighbor ID Pri State Dead Time Interface ID
Interface
150.1.6.6 1 FULL/ - - 11
OSPF_VL1
150.1.2.2 0 FULL/DROTHER 00:00:19 5
Serial0/0
150.1.1.1 0 FULL/DROTHER 00:00:17 5
Serial0/0
150.1.6.6 1 FULL/DR 00:00:38 4
FastEthernet0/1
!
interface Serial0/0
no ip address
encapsulation frame-relay
ipv6 address FEC0::A:0:0:7B:3/125
ipv6 ospf hello-interval 5
ipv6 ospf 1 area 0
frame-relay map ipv6 FEC0::A:0:0:7B:1 301 broadcast
frame-relay map ipv6 FEC0::A:0:0:7B:2 302 broadcast
frame-relay map ipv6 FE80::20F:34FF:FEA9:FF20 302 broadcast
frame-relay map ipv6 FE80::20F:34FF:FE49:73C0 301 broadcast
frame-relay lmi-type cisco
R3#sh ipv os int s0/0
Serial0/0 is up, line protocol is up
Link Local Address FE80::20F:34FF:FEA9:FD60, Interface ID 5
Area 0, Process ID 1, Instance ID 0, Router ID 150.1.3.3
Network Type NON_BROADCAST, Cost: 64
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 150.1.3.3, local address
FE80::20F:34FF:FEA9:FD60
No backup designated router on this network
Timer intervals configured, Hello 5, Dead 20, Wait 20, Retransmit 5
Hello due in 00:00:04
Index 1/2/3, flood queue length 0
Next 0x0(0)/0x0(0)/0x0(0)
Last flood scan length is 4, maximum is 7
Last flood scan time is 0 msec, maximum is 4 msec
Neighbor Count is 2, Adjacent neighbor count is 2
Adjacent with neighbor 150.1.2.2
Adjacent with neighbor 150.1.1.1
Suppress hello for 0 neighbor(s)
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:47 GMT-3