From: "Griffith
Date: Wed Jan 04 2006 - 09:53:34 GMT-3
I'm not getting the results I'm used to with the TCL ping scripts but I do
think the TCL script is executing, just not displaying the results.
Depending on the number of devices I try to ping, the system takes a
variable amount of time to redisplay the TCL prompt. Pinging 5 devices
takes 19 seconds where 1 device takes 7 (more or less).
The same syntax does work on my older routers.
Since I don't really know TCL, I don't know if there's a command to "echo"
the results or not... but that's where I was going to look next. Of course,
there's probably a ton of people out there who already know the answer...
Darlene
-----Original Message-----
From: kelvin@webmail.co.za
To: ccielab@groupstudy.com
Sent: 1/4/2006 7:25 AM
Subject: TCL on ISRs (2/3800 series)
Hi All
Has anyone managed to get the TCL script to excecute on the ISR (2/3800)
series routers?
For some reason I can't (running 12.4 enterprise) and I am so used to
using this method that I am concerned that when I get to the lab and
only have ISRs I will be stuck.
The ISR allows one to get into tcl mode but won't excecute the script.
It does nothing and remains in tcl mode.
I can rcmd to ISR from non_ISR router (eg 2/3600).
PLEASE HELP! and thanks in advance
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:47 GMT-3