IE Vol1 LAB 2 Multicast over Frame Relay Cloud

From: Greg Gombas (ggombas@hotmail.com)
Date: Tue Jan 03 2006 - 19:40:19 GMT-3

Next message: Church, Chuck: "RE: Bring up an interface at a specific time?"
Previous message: Mike Ollington: "Re: Bring up an interface at a specific time?"
Next in thread: John Howell \(DHL US\): "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Maybe reply: John Howell \(DHL US\): "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Maybe reply: Greg Gombas: "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Maybe reply: Brian McGahan: "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Maybe reply: Brian McGahan: "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Maybe reply: Greg Gombas: "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Maybe reply: Greg Gombas: "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Maybe reply: Scott Morris: "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Maybe reply: Greg Gombas: "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Maybe reply: Brian McGahan: "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Maybe reply: Scott Morris: "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Maybe reply: Greg Gombas: "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Maybe reply: Greg Gombas: "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Maybe reply: Scott Morris: "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello,

I was hoping someone help me figure out this scenario.

R6 (Source)
    |
    R2
  / \
R1----R3
|
SW1 (Receiver)

R1, R2 and R3 are connected via a full frame relay mesh.
OSPF is runnig on the frame relay mesh in point-to-multipoint mode.

R2 is acting as RP with static RP configured on all devices.

R1 is showing R3 as next hop to RP.

I am doing debug ip pim on all devices and I can see that R1 is sending the
PIM join message from SW1 to R3 but R3 is not forwarding the join message to
R2.

I did all the debugs I can think of on R3 but there is no indication of an
RPF failure. How can I troubleshoot this?

Thanks,
Greg

Next message: Church, Chuck: "RE: Bring up an interface at a specific time?"
Previous message: Mike Ollington: "Re: Bring up an interface at a specific time?"
Next in thread: John Howell \(DHL US\): "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Maybe reply: John Howell \(DHL US\): "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Maybe reply: Greg Gombas: "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Maybe reply: Brian McGahan: "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Maybe reply: Brian McGahan: "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Maybe reply: Greg Gombas: "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Maybe reply: Greg Gombas: "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Maybe reply: Scott Morris: "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Maybe reply: Greg Gombas: "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Maybe reply: Brian McGahan: "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Maybe reply: Scott Morris: "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Maybe reply: Greg Gombas: "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Maybe reply: Greg Gombas: "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Maybe reply: Scott Morris: "RE: IE Vol1 LAB 2 Multicast over Frame Relay Cloud"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:47 GMT-3