From: Montiean (noktes@bellsouth.net)
Date: Mon Jan 02 2006 - 13:36:27 GMT-3
Assuming we configured the syslog server to have each facility locating in
seperate file. For an example, facility local0 is located in file name
local0, facility local1 is in local1 file, facility local2 is in local2
file. If you are familiar with unix, it would be easy to see it. Then we
decide to configured cisco to send logging to facility local2 which mean the
messages will get into local2 file.
logging facility local2
Now you have to decide what level of the messages that we need to send and
locate in that local2 file. Asssume we need to send only level 4 and below
so we use
logging trap warning
Does this help?
Montiean
From: "Ashok M A" <maashok@cyberwerx.com>
To: <ccielab@groupstudy.com>
Sent: Monday, January 02, 2006 8:09 AM
Subject: what is facility in the command logging facility?
> Hi,
>
> I have question on where the command logging facility and logging trap
> should be used? I can't make out what exactly is logging facility command
> mean?
>
> Answers from you are appreciated.
>
> Ashok
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:47 GMT-3