From: lim es (tiga72@yahoo.com)
Date: Thu Dec 29 2005 - 11:39:33 GMT-3
Thanks Dave,
Here it is:
(neighbors are up)
R9#sh run int s0
Building configuration...
Current configuration : 229 bytes
!
interface Serial0
ip address 140.10.69.2 255.255.255.252
ip authentication mode eigrp 1 md5
ip authentication key-chain eigrp 1 new
ip summary-address eigrp 1 140.10.8.0 255.255.252.0 5
clockrate 64000
no fair-queue
end
R9#b
Interface IP-Address OK? Method
Status Protocol
Ethernet0 140.10.9.9 YES NVRAM
up up
Loopback0 100.0.0.9 YES NVRAM
up up
Loopback1 140.10.8.9 YES manual
up up
Loopback2 140.10.10.9 YES manual
up up
Loopback3 140.10.11.9 YES manual
up up
Serial0 140.10.69.2 YES NVRAM
up up
Serial1 unassigned YES NVRAM
administratively down down
Virtual-Access1 unassigned YES unset
up up
R9#r
router eigrp 1
network 140.10.69.2 0.0.0.0
no auto-summary
!
--- "Schulz, Dave" <DSchulz@dpsciences.com> wrote:
> Lim - Can you send over your config? Your
> summarization should work as
> long as it matches what is configured.
>
>
> Dave Schulz,
> Email: dschulz@dpsciences.com
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of
> lim es
> Sent: Thursday, December 29, 2005 9:27 AM
> To: ccielab@groupstudy.com
> Subject: eigrp summarization
>
> Hi Group,
>
> Got a simple question about the topic.
>
> eigrp does not require the less specific routes
> inside
> the network statement (in router eigrp) but just an
> existence of the targeted less-sepcific routes to be
> in the routing table for it to work.
>
> strangely, it does not advertise the summary until i
> add any of the less specific routes in the "network"
> command.
>
> am i missing something??
>
> Appreciate any advice on this
>
> Lim
>
>
>
>
>
>
> __________________________________
> Yahoo! for Good - Make a difference this year.
> http://brand.yahoo.com/cybergivingweek2005/
>
>
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:52 GMT-3