From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Wed Dec 28 2005 - 18:03:47 GMT-3
Yes. Also below is an example from the DocCD:
BGP Community with Route Maps Examples
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
fipr_c/ipcprt2/1cfbgp.htm#wp1002958
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
John Matus
Sent: Wednesday, December 28, 2005 12:53 PM
To: ccielab@groupstudy.com
Subject: route-map for send-community
can you use a route-map for send-community instead of attaching a
route-map
onto the network statement?
nei 1.1.1.1 send-community
nei 1.1.1.1 route-map send out
route-map send permit 10
match ip add prefix 5
set community no-export
ip prefix-l permit 5.5.5.5/32
....so that 1.1.1.1 will recieve the no-export for route 5.5.5.5
i dont have a lab to verify this at the moment.
TIA
Regards,
John D. Matus
Technical Support / PAS
Fujitsu Consulting
626-568-7716
John.Matus@tokiom.com
========================================================================
================================
This e-mail is intended solely for the individual to whom it
is
addressed. The information contained in this transmission
contains
confidential and/or proprietary information or is otherwise privileged.
If
the reader of this message is not the intended recipient, please be
advised
that any dissemination, distribution or copying of this transmission
is
strictly prohibited. If you have received this e-mail in error,
please
notify us immediately by returning it to the sender and deleting this
copy
from your system. Thank you for your
cooperation.
========================================================================
================================
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:52 GMT-3