From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Fri Dec 23 2005 - 15:21:46 GMT-3
1) Don't do DNS lookups on the routers in the path (Numeric display
[n]:)
2) Set the timeout lower (Timeout in seconds [3]:)
3) Don't send three probes per TTL (Probe count [3]:)
4) Start with a higher TTL if you know the first few routers in the
path (Minimum Time to Live [1]:)
5) End with a TTL lower than 30 in case the destination can not be
reached but enough to reach the destination if it is reachable (Maximum
Time to Live [30]:)
IE-Gateway#show clock
10:15:59.822 PST Fri Dec 23 2005
IE-Gateway#trace
Protocol [ip]:
Target IP address: 198.133.219.25
Source address:
Numeric display [n]: y
Timeout in seconds [3]: 1
Probe count [3]: 1
Minimum Time to Live [1]: 5
Maximum Time to Live [30]: 15
Port Number [33434]:
Loose, Strict, Record, Timestamp, Verbose[none]:
Type escape sequence to abort.
Tracing the route to 198.133.219.25
5 64.159.1.129 40 msec
6 4.68.123.41 28 msec
7 4.0.26.14 32 msec
8 128.107.239.53 28 msec
9 128.107.224.69 32 msec
10 *
11 *
12 *
13 *
14 *
15 *
IE-Gateway#show clock
10:16:23.546 PST Fri Dec 23 2005
IE-Gateway#
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Zukque
Sent: Friday, December 23, 2005 10:09 AM
To: Cisco certification
Subject: Cisco traceroute!
Hello All
Is there any way to make traceroute work a little bit quicker ?
Danke
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:52 GMT-3