From: Schulz, Dave (DSchulz@dpsciences.com)
Date: Fri Dec 23 2005 - 13:34:36 GMT-3
I ran into an interesting scenario on route preference, where we have a
serial link attached to a network running BGP. There is a BRI
connection that has a static route set at 250 metric to get to the
remote end (no interface backup), sending EIGRP routes. When the BGP
goes down, then the BRI will connect to the remote site and everything
works. However, when the serial (BGP) comes back up....the BRI
continues to stay up and prefer the static routes with EIGRP. I believe
that this is because there is not a backup mechanism (dialer watch,
backup, etc), and, the static route will continue to prefer the route
(nothing is telling the router to accept the better metric from a
different link). Any thoughts?
Dave Schulz,
Email: dschulz@dpsciences.com <mailto:dschulz@dpsciences.com >
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:52 GMT-3