Nbar on or off ?

From: Chris (chris_atkins@Blueyonder.co.uk)
Date: Fri Dec 23 2005 - 08:04:06 GMT-3

• Next message: Mike Louis: "Fwd: Re: Secure trunk links"
• Previous message: Venkatesh Palani: "Re: Question for Brian McGahan and others"
• Next in thread: Chris Lewis: "Re: Nbar on or off ?"
• Maybe reply: Chris Lewis: "Re: Nbar on or off ?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi all
I had always thought that you needed to switch on NBAR to match on a protocol
using CBWFQ, however i get matches without it on, so i guess I was wrong ?

Thanks in advance

Chris

Lab_R3#show ip nbar protocol-discovery

Lab_R3#sh policy-map interface Serial0/0.1

 Serial0/0.1

  Service-policy input: telnet

    Class-map: TELNET (match-all)
      180 packets, 8367 bytes
      5 minute offered rate 0 bps, drop rate 0 bps
      Match: protocol telnet
      police:
          cir 8000 bps, bc 1500 bytes
        conformed 180 packets, 8367 bytes; actions:
          transmit
        exceeded 0 packets, 0 bytes; actions:
          drop
        conformed 0 bps, exceed 0 bps

    Class-map: class-default (match-any)
      45 packets, 5348 bytes
      5 minute offered rate 0 bps, drop rate 0 bps
      Match: any

• Next message: Mike Louis: "Fwd: Re: Secure trunk links"
• Previous message: Venkatesh Palani: "Re: Question for Brian McGahan and others"
• Next in thread: Chris Lewis: "Re: Nbar on or off ?"
• Maybe reply: Chris Lewis: "Re: Nbar on or off ?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:52 GMT-3