From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Tue Dec 20 2005 - 16:51:28 GMT-3
It's just the default option when you enter the command.
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> John Matus
> Sent: Tuesday, December 20, 2005 1:17 PM
> To: ccielab@groupstudy.com
> Subject: rmon event 1 log owner config - IE V2.0 LAB6 11.6
>
> tasks specifies that routers should log events to a server....
>
> the solution has "rmon event 1 log owner config".....
>
> i'm confused about why the "owner config" part has been included. any
> ideas?
>
> TIA
>
>
> Regards,
>
> John D. Matus
> Technical Support / PAS
> Fujitsu Consulting
> 626-568-7716
> John.Matus@tokiom.com
>
========================================================================
==
> ==============================
> This e-mail is intended solely for the individual to whom
it
> is
> addressed. The information contained in this transmission
> contains
> confidential and/or proprietary information or is otherwise
privileged.
> If
> the reader of this message is not the intended recipient, please be
> advised
> that any dissemination, distribution or copying of this
transmission
> is
> strictly prohibited. If you have received this e-mail in error,
> please
> notify us immediately by returning it to the sender and deleting this
> copy
> from your system. Thank you for your
> cooperation.
>
========================================================================
==
> ==============================
>
>
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:51 GMT-3