From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Tue Dec 20 2005 - 03:13:00 GMT-3
2610, 2611, 2620, and 2621. Not sure about the models with
token ring.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: Loc Pham [mailto:loc.pham@comcast.net]
> Sent: Monday, December 19, 2005 9:54 PM
> To: Elliott Reyes; Brian McGahan; 'CCIEin2006'; 'lab'
> Subject: RE: IE Workbook and OSPFv3
>
> E, I done it on a 2621: n/p at all .
> lP.
> -------------- Original message ----------------------
> From: "Elliott Reyes" <elliottreyes@adelphia.net>
> > Will this work for 2621's as well ?
> >
> >
> >
> >
> > E
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> > Brian McGahan
> > Sent: Monday, December 19, 2005 5:48 PM
> > To: CCIEin2006; lab
> > Subject: RE: IE Workbook and OSPFv3
> >
> > You can boot the 2600XM 12.2T Enterprise Plus image to the 2620s
> > via the "tftpdlnd -r" command in rommon. This will allow them to
> > support OSPFv3.
> >
> >
> > HTH,
> >
> > Brian McGahan, CCIE #8593
> > bmcgahan@internetworkexpert.com
> >
> > Internetwork Expert, Inc.
> > http://www.InternetworkExpert.com
> > Toll Free: 877-224-8987 x 705
> > Outside US: 775-826-4344 x 705
> > 24/7 Support: http://forum.internetworkexpert.com
> > Live Chat: http://www.internetworkexpert.com/chat/
> >
> >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
Behalf
> > Of
> > > CCIEin2006
> > > Sent: Saturday, December 17, 2005 5:09 PM
> > > To: lab
> > > Subject: IE Workbook and OSPFv3
> > >
> > > Hello group,
> > >
> > > In the Version 3 workbook, do all routers need to support OSPFv3?
> > Which
> > > labs
> > > require it?
> > > I am asking because most of my routers are 2620's with 64meg ram
and
> > 16meg
> > > flash so the latest code I can load is 12.2(15)T Enterprise Basic.
> > > Unfortunately only IP plus version of 12.2(15)T supports OSPFv3
and
> > that
> > > requires 32 meg ram.
> > >
> > > I do, however, have 3 2600XM routers which do support OSPFv3 will
I be
> > > able
> > > to make due with those?
> > >
> > > Thanks!
> > >
> > >
> >
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:51 GMT-3