From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Mon Dec 19 2005 - 22:48:00 GMT-3
You can boot the 2600XM 12.2T Enterprise Plus image to the 2620s
via the "tftpdlnd -r" command in rommon. This will allow them to
support OSPFv3.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> CCIEin2006
> Sent: Saturday, December 17, 2005 5:09 PM
> To: lab
> Subject: IE Workbook and OSPFv3
>
> Hello group,
>
> In the Version 3 workbook, do all routers need to support OSPFv3?
Which
> labs
> require it?
> I am asking because most of my routers are 2620's with 64meg ram and
16meg
> flash so the latest code I can load is 12.2(15)T Enterprise Basic.
> Unfortunately only IP plus version of 12.2(15)T supports OSPFv3 and
that
> requires 32 meg ram.
>
> I do, however, have 3 2600XM routers which do support OSPFv3 will I be
> able
> to make due with those?
>
> Thanks!
>
>
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:51 GMT-3