V3.0 Lab1 Requirement 3.3

From: Faryar Zabihi \(fzabihi\) (fzabihi@cisco.com)
Date: Sun Dec 18 2005 - 09:32:53 GMT-3

• Next message: CCIE Group Study: "Re: RSVP simulation!"
• Previous message: Stefan Grey: "RSVP simulation!"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I wanted to know if the solution guide is wrong on Lab1 section 3.3 I
have

redistribute connected subnets route-map Vlan6OSPF

but the solution guide has

redistribute connected route-map Vlan6OSPF

Doing the solution guide does not work. I do not know of any other way
to advertise vlan 6 without using the subnets word in the redistribute
command.

The route shows up on R4 as such

O E2 183.1.6.0 [110/20] via 183.1.46.6, 00:54:28, Ethernet1/0

Am I doing this right?

 Faryar Zabihi

• Next message: CCIE Group Study: "Re: RSVP simulation!"
• Previous message: Stefan Grey: "RSVP simulation!"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:51 GMT-3