From: wei bin (binwei@public.hk.hi.cn)
Date: Fri Dec 16 2005 - 04:09:33 GMT-3
Joshua Li,Dz:C#!
please change config-register
router(config)#config-register 0x2101
router#reload
======= 2005-12-16 14:47:25 DzTZ@4PEVPP45@#:=======
>Hi,
>
>I am trying to save my configuration file into NVRAM in a Cisco 2501 router.
>But i get failed.
>
>r1>sh ver
>Cisco Internetwork Operating System Software
>IOS (tm) 2500 Software (C2500-IS-L), Version 12.3(16)
>...
>
>16384K bytes of processor board System flash (Read ONLY)
>..
>
>r1#dir
>Directory of flash:/
>
> 1 -rw- 16228680 <no date> /c2500-is-l.123-16.bin
>
>16777212 bytes total (548468 bytes free)
>
>r1#copy run flash
> **** NOTICE ****
>Flash load helper v1.0
>This process will accept the copy options and then terminate
>the current system image to use the ROM based image for the copy.
>Routing functionality will not be available during that time.
>If you are logged in via telnet, this connection will terminate.
>Users with console access can see the results of the copy operation.
> ---- ******** ----
>Proceed? [confirm]
>Destination filename [r1-confg]? xin
>Erase flash: before copying? [confirm]n
>*Mar 1 08:15:07.169: %SYS-5-RELOAD: Reload requested
>%FLH: /running-config from 255.255.255.255 to flash ...
>
>System flash directory:
>File Length Name/status
> 1 16228680 /c2500-is-l.123-16.bin
>[16228744 bytes used, 548472 available, 16777216 total]
>Accessing file '/running-config' on 255.255.255.255... [failed]
>
>%FLH: retry #1
>%FLH: /running-config from 255.255.255.255 to flash ... (retry)
>
>Any suggestions?
>
>Thanks,
>
>Joshua
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
= = = = = = = = = = = = = = = = = = = =
!!!!!!!!!!!!!!!!VB
@q#!
!!!!!!!!!!!!!!!!wei bin
!!!!!!!!!!!!!!!!binwei@public.hk.hi.cn
!!!!!!!!!!!!!!!!!!!!2005-12-16
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:51 GMT-3