From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Thu Dec 15 2005 - 21:11:31 GMT-3
Router(config-if)#dialer idle-timeout 120 ?
either Reset idle timer based on both inbound and outbound traffic
inbound Reset idle timer based on inbound traffic only
<cr>
Router(config-if)#dialer idle-timeout 120
Dialer Idle Timer Inbound Traffic Configuration
http://www.cisco.com/en/US/products/sw/iosswrel/ps1834/products_feature_
guide09186a008007ffd1.html
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Cisco Nuts
Sent: Thursday, December 15, 2005 3:55 PM
To: ccielab@groupstudy.com
Cc: cisconuts@hotmail.com
Subject: dialer idle-timeout 120 outbound question ???
Hello: If the dialer idle-timeout is only reset by outgoing traffic then
how does setting the dialer idle-timeout 120 to outbound actually match
on inbound traffic? Thanks!!!
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:51 GMT-3