From: Stefan Grey (examplebrain@hotmail.com)
Date: Wed Dec 14 2005 - 14:47:02 GMT-3
Hello guys,
My task is to configure the RSVP protocol. I need to see the Path messages
Resv messages and some others in the network. I am configuring RSVP the
first time and faced to some problems..
Could anybody suggest any easy way how to configure it between some devices
to see this packets?? Any suggestion or..
Topology
lo0-Routerfa0/0 - fa0/0.94 Router -lo0
Now I am trying to simulate the RSVP Path and Resv messages using
ip rsvp reservation and ip rsvp send commands:
While debugging I see some initiation but show ip rsvp counters command
doesn't display any Resv and Path messages transmited. I tried to configure
this the same way but using ip rsvp sender-host and ip rsvp reservation-host
but also unsuccessfully.
ITP
ip route 0.0.0.0 0.0.0.0 212.109.48.169
no ip http server
ip rsvp sender 212.109.47.62 212.109.47.173 1 0 0 212.109.48.171
FastEthernet0
/0 5 1
ip rsvp reservation 212.109.47.62 212.109.47.173 1 0 0 212.109.47.173
FastEthe
rnet0/0 FF RATE 5 1
ip rsvp signalling hello statistics
!
interface Loopback0
ip address 212.109.47.173 255.255.255.255
interface FastEthernet0/0
ip address 212.109.48.171 255.255.255.248
MGC:
ip rsvp sender 212.109.47.173 212.109.47.62 1 0 0 212.109.48.173
FastEthernet0
/0.94 5 1
ip rsvp reservation 212.109.47.173 212.109.47.62 1 0 0 212.109.48.62
FastEthe
rnet0/0.94 FF RATE 5 1
interface Loopback0
ip address 212.109.47.62 255.255.255.255
interface FastEthernet0/0.94
ip address 212.109.48.173 255.255.255.248
What do I make wrong??
Thank to everybody in advance.
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:51 GMT-3