From: Imal kalutotage (imal.kalutotage@gmail.com)
Date: Sun Dec 11 2005 - 05:56:25 GMT-3
Hi John,
If you enable frame-relay traffic shaping, interface queuing will be changed
to FIFO.
In that case you may need to enable fair-queue if there is a requirement to
do so.
.
The basic thing you have to understand here is you have 2 levels of queues
in Frame-relay.
1. Interface queue
2. PVC queue
this is a good url & it will clear your doubts.
http://www.cisco.com/en/US/tech/tk543/tk544/technologies_tech_note09186a00800
a4754.shtml
Cheers
Imal
On 12/9/05, John Matus <John.Matus@tokiom.com> wrote:
>
> what would the technical difference be between:
>
> int s0/0
> fair-queue
>
> and
>
> int s0/0
> frame interface 111
> class frts
>
> map-class frame-relay frts
> frame-relay fair-queue
>
>
> would the 1st just apply fair-queue to everything under the interface and
> the 2nd would do it on a per/DLCI basis? ....but both accomplish the
> same
> thing?
>
>
> Regards,
>
> John D. Matus
> Technical Support / PAS
> Fujitsu Consulting
> 626-568-7716
> John.Matus@tokiom.com
>
>
=============================================================================
===========================
> This e-mail is intended solely for the individual to whom it
> is
> addressed. The
> information contained in this transmission contains
> confidential and/or proprietary information or is otherwise privileged.
> If
> the reader of this message is not the intended recipient, please be
> advised
> that any dissemination, distribution or copying of this transmission
> is
> strictly prohibited. If you have received this e-mail in error,
> please
> notify us immediately by returning it to the sender and deleting this
> copy
> from your system. Thank you
> for your cooperation.
>
>
=============================================================================
===========================
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:50 GMT-3