From: Tim (ccie2be@nyc.rr.com)
Date: Sat Dec 10 2005 - 20:32:22 GMT-3
SAN,
The best way to find out is to use the Feature Navigator. Are you familiar
with that tool?
If not, you should really do a search on Cisco to learn about and play with
that tool. It can come in handy in many a situation.
HTH, Tim
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of san
Sent: Saturday, December 10, 2005 6:29 PM
To: James Ventre
Cc: lab
Subject: Re: EtherChannel Question
Can New ISRs have L3 etherchannel also ?
How about regular 2600 Routers ?
Thanks
SAN
On 12/10/05, James Ventre <messageboard@ventrefamily.com> wrote:
> >Can Router have EtherChannel ?
>
> Well, it depends on how you define a router. The new ISR series can
> have an etherswitch module in it - which can support etherchannel.
>
> James
>
>
>
> san wrote:
> > Hi,
> >
> >
> > Would like to know, how to configure the below topology ? Is it Ether
> > channel L3 ? or R3 to SW1 is a trunk ?
> >
> > Mentioned in the Diagram is R3 to r5 is a different vlan from R3 to SW1.
> > I dont have access to physcial connectivity. But can it be found from
> > the information given.
> >
> > Can Router have EtherChannel ?
> >
> > What i learnt from books is "Ring over Ethernet" is Etherchannel.?
> > Is my assumption correct ? Is my assumption valid only for Switches &
> > not routers ?
> >
> >
> >
> > / \
> > | |
> > R3--------|---|-----------------R5
> > ------------| |------|
> > \/ |
> > |
> > |
> > sw1
> >
> >
> > Thanks
> > SAN
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:50 GMT-3