From: Schulz, Dave (DSchulz@dpsciences.com)
Date: Mon Dec 05 2005 - 19:18:48 GMT-3
Dave -
Yes, I tried that with similar results. New information.... I set the speed
and duplex on both port-channels and everything started working. very
strange. Thanks
Dave
-----Original Message-----
From: Dave Meyer
To: Schulz, Dave
Sent: 12/5/2005 4:31 PM
Subject: Re: Etherchannel issues
can you set the mode to desirable on CAT2 ?
Regards,
Dave
______________________________________________
Architecture & Engineering
Work: (201) 593-5545
Cell: (973) 907-4963
"Schulz, Dave" <DSchulz@dpsciences.com>
Sent by: nobody@groupstudy.com
12/05/2005 03:10 PM
Please respond to "Schulz, Dave"
To: <ccielab@groupstudy.com>
cc:
Subject: Etherchannel issues
I know I have done this a million times before, but am running into some
issues. I am setting up vtp server/client between two cats with
etherchannel,
using fa0/13 and fa0/14 and having problems. Here is a section of the
show
etherchannel detail (I am trying to find more info on the flags on docCD
and
not finding it)....
Local information:
Hello Partner PAgP Learning
Group
Port Flags State Timers Interval Count Priority Method
Ifindex
Fa0/14 SAC U6/S7 HQ 30s 1 128 Any 29
Here is the config....
CAT1.....
!
interface Port-channel1
switchport trunk encapsulation dot1q
switchport mode trunk
!
(output omitted)
!
interface FastEthernet0/13
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 1 mode desirable
!
interface FastEthernet0/14
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 1 mode desirable
!
CAT2....
interface Port-channel1
switchport trunk encapsulation dot1q
switchport mode trunk
!
(output omitted)
!
interface FastEthernet0/13
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 1 mode auto
!
interface FastEthernet0/14
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 1 mode auto
!
The vlan information is not being sent from CAT1 to CAT2 through VTP.
Maybe
this is a bug in the software? Maybe I'm just missing something. Is
there
some strange order that needs to happen to initiate the etherchannel?
Dave
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:50 GMT-3