From: Schulz, Dave (DSchulz@dpsciences.com)
Date: Mon Dec 05 2005 - 11:39:21 GMT-3
This is correct for the privileges, but I believe that we may need to have
some type of authentication for login....please correct me if I am wrong.
Maybe something like this.....(in additon to what Victor has submitted)....
aaa new-model
aaa authentication login CONS local
aaa authentication enable default enable
aaa authorization exec default local
!
line con 0
line vty 0 4
login authentication CONS
!
end
Dave
-----Original Message-----
From: nobody@groupstudy.com
To: 'Victor Cappuccio'; andervb@yahoo.dk
Cc: ccielab@groupstudy.com
Sent: 12/5/2005 8:18 AM
Subject: RE: privilege.
Please excuse me, change 7 to 3
Regards
Victor.
-----Mensaje original-----
De: Victor Cappuccio [mailto:cvictor@protokolgroup.com]
Enviado el: lunes, 05 de diciembre de 2005 9:17
Para: 'andervb@yahoo.dk'
CC: 'ccielab@groupstudy.com'
Asunto: RE: privilege.
rtrEdge(config)#username test privilege ?
<0-15> User privilege level
rtrEdge(config)#username test privilege 3
rtrEdge(config)#privilege exec ?
all All suboption will be set to the samelevel
level Set privilege level of command
reset Reset privilege level of command
rtrEdge(config)#privilege exec level ?
<0-15> Privilege level
rtrEdge(config)#privilege exec level 7 ?
LINE Initial keywords of the command to modify
rtrEdge(config)#privilege exec level 7 copy run start
HTH
Victor.
-----Mensaje original-----
De: nobody@groupstudy.com [mailto:nobody@groupstudy.com] En nombre de
andervb@yahoo.dk
Enviado el: lunes, 05 de diciembre de 2005 9:07
Para: ccielab@groupstudy.com
Asunto: privilege.
Simple question : How can I configure a user with a privilege that he
can
only save the config as the command write or copy run start?
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:50 GMT-3