From: vidhya natarajan (vidhyanatarajan@rediffmail.com)
Date: Sun Dec 04 2005 - 14:18:59 GMT-3
Hi Venkat,
From which router are you getting pim join to R2.. Whats the
config on this router which is sending a pim join? Have you configured a
static rp there also? can you please paste the config from that router?
Thanks,
Vidhya
On Sun, 04 Dec 2005 Venkataramanaiah.R wrote :
>Folks,
>
>R2
is the static RP configured, but when it receives the PIM join for
>224.8.8.8,
it does not seem to accept the join..
>
>fyi.. I am running 122-15.T17 on R2..
>
>Any idea why>>?
>
>Regards
>-Venkat
>
>R2#deb ip pim
>PIM debugging is on
>R2#
>*Mar 1 00:02:51.795: PIM(0): Received v2 Join/Prune on Serial0/0 from
>13.13.45.4, not to us
>R2#
>*Mar 1 00:02:53.791: PIM(0): Received v2
Join/Prune on Serial0/0 from
>13.13.45.4, not to us
>*Mar 1 00:02:54.791:
PIM(0): Received v2 Join/Prune on Serial0/0 from
>13.13.45.4, not to us
>R2#sr
int s0/0
>Building configuration...
>
>Current configuration : 387 bytes
>!
>interface Serial0/0
> ip address 13.13.235.2 255.255.255.0
> ip pim
sparse-mode
> encapsulation frame-relay
>
>ip pim rp-address 13.13.235.2 82
override
>R2#sac 82
>Standard IP access list 82
> 10 permit 224.8.8.8
>
>R2#
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:50 GMT-3