From: Stuart.Juggins@computacenter.com
Date: Fri Dec 02 2005 - 13:41:53 GMT-3
Cool, thanks again Brian.
-----Original Message-----
From: Brian McGahan [mailto:bmcgahan@internetworkexpert.com]
Sent: 02 December 2005 16:40
To: Stuart Juggins; bmcgahan@internetworkexpert.com;
ccielab@groupstudy.com
Subject: RE: IOS version for 2610's
You'll need to do it everytime you boot. The router will
remember the tftp server address and the image name when you set the
variables in rommon though.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Stuart.Juggins@computacenter.com
> Sent: Friday, December 02, 2005 10:26 AM
> To: bmcgahan@internetworkexpert.com; ccielab@groupstudy.com
> Subject: RE: IOS version for 2610's
>
> Brian,
>
> Thanks, that should work a treat. I presume if I reboot the router I
will
> need to issue the command again, or could I just use the set variable
to
> make it permanent?
>
> Thanks again,
> Stuart.
>
> -----Original Message-----
> From: Brian McGahan [mailto:bmcgahan@internetworkexpert.com]
> Sent: 02 December 2005 16:15
> To: Stuart Juggins; Ajaz.Nawaz@bskyb.com; ccielab@groupstudy.com
> Subject: RE: IOS version for 2610's
>
> Stuart,
>
> You can boot the 2610 from flash with a higher image. Boot into
> rommon and issue the "tftpdnld -r" command. This will tftp boot the
> image and run it from ram. Once you start getting into the larger
image
> range the router will not boot, but you can at least run the latest
> 12.2T Enterprise Plus version, which should be sufficient for most
> features.
>
>
> HTH,
>
> Brian McGahan, CCIE #8593
> bmcgahan@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987 x 705
> Outside US: 775-826-4344 x 705
> 24/7 Support: http://forum.internetworkexpert.com
> Live Chat: http://www.internetworkexpert.com/chat/
>
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > Stuart.Juggins@computacenter.com
> > Sent: Friday, December 02, 2005 8:23 AM
> > To: Ajaz.Nawaz@bskyb.com; ccielab@groupstudy.com
> > Subject: RE: IOS version for 2610's
> >
> > Ajaz,
> >
> > The feature sets in use are :-
> >
> > Advanced IP Services and Enterprise Plus, I've already checked with
> > ccie@cisco.com
> >
> > I know the 2620 and 2621 support 32mb flash, problem is I don't want
> to
> > sell my whole rack of 2610's and 2612's, there must be a version and
> > feature set we can use to do 90-95% of the stuff on that only
requires
> > 64/16 memory.
> >
> > Thanks.
> >
> > -----Original Message-----
> > From: Nawaz, Ajaz [mailto:Ajaz.Nawaz@bskyb.com]
> > Sent: 02 December 2005 14:14
> > To: Stuart Juggins; ccielab@groupstudy.com
> > Subject: RE: IOS version for 2610's
> >
> > Fyi the 2620 and 2621 support 32mb flash (that's the nonXM).
> > There is 12.3 available with this configuration.
> >
> > Feature set?, according to a post some days ago if you send an email
> to
> > ccie@cisco.com you can ask what feature set is planned in the new
> year.
> > Check out Brian's reply too - it discusses the introduction of new
> > features
> > come Jan 1st.
> >
> > I would say the majority of candidates who have lab environment are
> all in
> > same boat :( All the best and let us know if you learn anything
new
> in
> > terms of feature set.
> >
> > Ajaz Nawaz
> >
> >
> >
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > Stuart.Juggins@computacenter.com
> > Sent: 02 December 2005 12:48
> > To: ccielab@groupstudy.com
> > Subject: IOS version for 2610's
> >
> > Which version and feature set should I use on my lab of 2610's? I
was
> > looking at 12.3.17 but the Advanced IP Services and Enterprise Plus
> > feature sets aren't available for the 2610-2613 range.
> >
> >
> >
> > I can't afford to upgrade all of my routers to XM series routers so
> any
> > help greatly appreciated.
> >
> >
> > Thanks,
> >
> > Stuart.
> >
> >
> >
> > COMPUTACENTER (UK) LTD
> >
> > The contents of this e-mail are intended for the named addressee
only.
> > It contains information which may be confidential and which may also
> be
> > privileged.
> > Unless you are the named addressee (or authorised to receive for the
> > addressee)
> > you may not copy or use it, or disclose it to anyone else.
> >
> > If you received it in error please notify us immediately and then
> destroy
> > it.
> >
> > Computacenter information is available from
> http://www.computacenter.com
> >
> > This footnote also confirms that this email message has been swept
for
> the
> > presence of computer viruses.
> >
> > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*
> * *
> > *
> > * * * * * * * * * * * * * *
> >
> >
>
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:50 GMT-3