RE: Port Security

From: Chris Lewis (chrlewiscsco@yahoo.com)
Date: Wed Nov 30 2005 - 16:54:25 GMT-3


To not lose the mac address could be accomplished with sticky on the port security configuration. As long as the switch can drop packets from the non specified source address, your original config looks good to me if you added sticky.
   
  Chris

Chad Hintz <ccie_2b2004@yahoo.com> wrote:
    Yes If it detects another mac-address it will not shutdown the port but it will log a message. Is this possible? Also if it reboots it should not lose the mac address entered.

Chris Lewis <chrlewiscsco@yahoo.com> wrote: I don't think there is an option to log on MAC ACLs on a 3550.

The issue I have here is in the wording of your question. If by "and if another is detect to continue to forward packets but log a message" you mean it only has to forward packets from the one address you have identified, I think your configuration is good. If it has to orward the packets from the non-specified adress and log a message, that is a different situation and I don't know how to do that.

Chris

Chad Hintz wrote:
I do not see a log option with mac acls on the doc cd. Am I missing something? Brians? Scott? all the other experts???

Chris Lewis wrote: Can you share an example of using the log option with MAC ACLs?

El ayachi HADEK wrote: violation traffic will be dropped, there is no other choice.
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12225sec/3550scg/s
wtrafc.htm#wp1038501
you can use mac acl with the logg option! try it and let me know!

-----Message d'origine-----
De : nobody@groupstudy.com [mailto:nobody@groupstudy.com]De la part de
Chad Hintz
Envoye : Wednesday, November 30, 2005 4:57 PM
A : ccie lab
Objet : Port Security

Hi All,

I have been trying to get through a port security question for a customer
and wanted to verify my configuration.

If I wanted to setup the switch to only allow the directly connected
router's mac address to be allowed on the port and if another is detect to
continue to forward packets but log a message. Would this be correct?

Routers' mac:000b.be90.2d72

interface GigabitEthernet0/1
switchport mode access
switchport port-security
switchport port-security violation restrict
switchport port-security mac-address 000b.be90.2d72

Thanks,

Chad

---------------------------------
Yahoo! Music Unlimited - Access over 1 million songs. Try it free.



This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:08 GMT-3