From: ronald.kaduwa@bell.ca
Date: Wed Nov 30 2005 - 12:21:36 GMT-3
You can use the "neighbor ip-address database-filter all out" command in
router config mode for OSPF. I don't think there is a similar command
for EIGRP. I stand to be corrected.
Roni.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Mike Ollington
Sent: Wednesday, November 30, 2005 10:00 AM
To: ccielab@groupstudy.com
Subject: Preventing an EIGRP/OSPF Neighbor Forming
Hello,
Hypothetical - you have an interface with many EIGRP/OSPF neighbours.
You want to prevent one; you don't want to use an interface access list.
In BGP there is the neighbour shutdown command, PIM has a neighbour
list. Any thing similar for OSPF or EIGRP?
Thanks,
Mike
Mike Ollington
Technical Consultant
Dimension Data
Building 2 , Waterfront Business Park
Fleet Road, Fleet
Hampshire GU51 3QT
+44 12 5277 9574 Office
+44 12 5277 9010 Fax
For further information about Dimension Data, please go to
www.dimensiondata.com
**********************************************************************
This email and any files transmitted with it are confidential and
intended
solely for the use of the individual or entity to whom they are
addressed. If
you have received this email in error please notify the system manager.
Although Dimension Data has taken reasonable precautions to ensure no
viruses
are present in this email, the company cannot accept responsibility for
any
loss or damage arising from the use of this email or attachments.
www.uk.didata.com
**********************************************************************
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:08 GMT-3