From: Todd.Osterberg@compucom.com
Date: Mon Nov 28 2005 - 17:37:14 GMT-3
I ran into this same problem a couple of weeks ago. My workaround was as
follows..
interface Loopback11
no ip address
ipv6 address 2001:CC1E:1:4545::4/64
!
interface Serial0/0
no ip address
encapsulation ppp
pulse-time 1
no fair-queue
ppp multilink
!
!
interface Serial0/1
no ip address
encapsulation ppp
pulse-time 1
ppp multilink
interface Virtual-Template11
ip address 132.1.45.4 255.255.255.248
ipv6 unnumbered Loopback11
ppp authentication chap
ppp chap hostname multi
ppp chap password 0 multi
ppp multilink
Todd Allen Osterberg
Senior Consultant, Professional Services US Western Region
CompuCom
eMail: todd.osterberg@compucom.com
T: (916) 577-1066
C: (916) 316-4650
www.CompuCom.com
________________________________
From: nobody@groupstudy.com on behalf of Leigh Harrison
Sent: Mon 11/28/2005 7:18 AM
To: Josh Heesen
Cc: 22Cent@gmail.com; Group Study
Subject: Re: IPv6 over FRAME with Virtual-Templates
Hey there chaps,
What configs did you try ?
LH
Josh Heesen wrote:
> I tried this with no luck also. The problem seems to occur because the
routers lack of installing the ipv6 address of the virtual template in the
routing table. When you try and send ipv6 traffic accross it has not route.
Wonder if its supported fully?
>
> Josh
>
>
>"22Cent@gmail.com" <22cent@gmail.com> wrote:
> Hi guys,
>Has anyone done IPv6 over frame-relay using virtual-templates? Any config
>examples would be appreciated. Thanks.
>
>Ray
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>---------------------------------
> Yahoo! Music Unlimited - Access over 1 million songs. Try it free.
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:08 GMT-3