From: Scott Morris (swm@emanon.com)
Date: Wed Nov 23 2005 - 13:46:19 GMT-3
Which part? The distribute list can be done on any router since it only has
a local effect. The area filter-list, you're correct, must be done on an
ABR since it filters things going into or out of an area itself.
HTH,
Scott
_____
From: Donny mateo Tandase [mailto:donnymateo@yahoo.com]
Sent: Wednesday, November 23, 2005 10:52 AM
To: Scott Morris; 'de Witt, Duane'; 'lim es'; ccielab@groupstudy.com
Subject: RE: filtering ospf routes possible?
Scott,
just to clarify, this only applies to ABR I pressume...
Scott Morris <swm@emanon.com> wrote:
The rule (per spec) is that all OSPF devices within an area must have an
identical database.
The distribute-list command works fine, but it's only inbound. And actually
it filters between the database and the routing table (see rule above).
You can do an area filter-list if you want, that filters a route from
entering (or leaving) an entire area. That's more specific than using a
stub type area, but still doesn't violate the above rule.
Cheers,
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of de
Witt, Duane
Sent: Wednesday, November 23, 2005 8:27 AM
To: lim es; ccielab@groupstudy.com
Subject: RE: filtering ospf routes possible?
Who told you that you can't use a distribute list?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of lim
es
Sent: 23 November 2005 03:20 PM
To: ccielab@groupstudy.com
Subject: filtering ospf routes possible?
Hi
Are there any ways to filter ospf routes other than using "stub" network
type?
cant use distribute list or route maps to filter ospf routes ,So does it
mean that ospf isnt flexible as compared to eigrp or BGP ??
any comments?
__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005 http://mail.yahoo.com
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:07 GMT-3