From: Loc Pham (loc.pham@comcast.net)
Date: Tue Nov 22 2005 - 14:00:46 GMT-3
n/p Dave,
Look at the bright side, you can use it for a real network any time for the next few years ... and the ebay price is not so bad .
lP.
From: "Schulz, Dave" <DSchulz@dpsciences.com>
To: <RIDNEY_M_LAUDIANO.TTSP@ts.tsuneishi.co.jp>, <loc.pham@comcast.net>
Cc: <ccielab@groupstudy.com>
Subject: RE: 2500 ethernet ....encap dot1q
Date: Tue, 22 Nov 2005 12:21:25 +0000
Content-Type: text/plain; charset="us-ascii"
X-Converted-To-Plain-Text: from Multipart/alternative by GroupStudy
X-Converted-To-Plain-Text: Alternative section used was text/plain
Thanks, everyone...for your responses on this question. I appreciate it.
Looks like I need to purchase another piece of equipment.
Dave
-----Original Message-----
From: RIDNEY_M_LAUDIANO.TTSP@ts.tsuneishi.co.jp
To: loc.pham@comcast.net
Cc: ccielab@groupstudy.com; Schulz, Dave
Sent: 11/22/2005 12:00 AM
Subject: RE: 2500 ethernet ....encap dot1q
thanks! i'll get one :-)
loc.pham@comcast.net (Loc Pham) wrote on 11/22/2005 12:42:27 PM:
) [image removed]
) Here you go:
) cisco 2611 (MPC860) processor (revision 0x203) with 61440K/4096K
) bytes of memor.
) Processor board ID JAD042403C0 (2486854058)
) M860 processor: part number 0, mask 49
) Bridging software.
) X.25 software, Version 3.0.0.
) TN3270 Emulation software.
) 2 Ethernet/IEEE 802.3 interface(s)
) ...
) R4(config)#int e0/0
) R4(config-if)#int e0/0.12
) R4(config-subif)#encap d?
) dot1Q
) R4(config-subif)#encap d 12
) R4(config-subif)#ip ad 172.16.12.4 255.255.255.0
) R4(config-subif)#int e0/0.22
) R4(config-subif)#encap d 22
) R4(config-subif)#ip ad 172.16.22.4 255.255.255.0
) R4(config-subif)#^Z
)
) HTH,
) lP
)
) > Loc Pham,
) >
) > are you sure about 2610/2611 having 10mbps ethernet interfaces
) doing inter-vlan
) > routing? as far as i know, you need fastethernet interfaces
(2620/2621
for
) > example) to do that.
) >
) > thanks.
) >
) > ridney
) >
) >
) >
) > loc.pham@comcast.net (Loc Pham) wrote on 11/22/2005 11:53:47 AM:
) >
) > ) [image removed]
) > ) Dave, try the 26xx router for a chance:
) > ) I have few 2611 that would do router on a stick fine with
) > ) ethernet10M ( within the ccie lab of course, I would not use them
in
) > ) production! ).
) > ) HTH,
) > ) lP.
) >
) > )
) > ) > Thanks, Ridney.
) > ) >
) > ) > -----Original Message-----
) > ) > From: nobody@groupstudy.com
) > ) > To: Schulz, Dave; ccielab@groupstudy.com
) > ) > Sent: 11/21/2005 10:16 PM
) > ) > Subject: Re: 2500 ethernet ....encap dot1q
) > ) >
) > ) > it is not possible with 2500 routers. the hardware (LANCE) used
on
these
) > ) > routers
) > ) > are not capable of doing vlan tagging/encapsulation. i've heard
that
) > ) > 4500s do
) > ) > this despite having a 10mb ethernet port, but i'm not sure.
) > ) >
) > ) > ridney
) > ) >
) > ) >
) > ) >
) > ) > "Schulz, Dave" <DSchulz@dpsciences.com> wrote on 11/22/2005
11:01:42 AM:
) > ) >
) > ) > ) [image removed]
) > ) > ) Does anyone know what software level I need on a 2500 to be
able
to
) > ) > use
) > ) > ) ethernet subinterfaces and encapsulation dot1q?
) > ) >
) > ) > ) Dave
) > ) >
) > ) > )
) > ) >
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:07 GMT-3