From: jeff.s.golia@verizon.com
Date: Tue Nov 22 2005 - 12:17:13 GMT-3
SH INT SUMM
*******************************************
Jeffrey Golia
CCIE#14849
Tac Engineer (Converged Technology Services)
Verizon Enterprise Premise Solutions
Tel # 1-800-993-2264
email : Jeff.S.Golia@Verizon.com
*******************************************
"kevin gannon" <kevin@gannons.net>
Sent by: nobody@groupstudy.com
11/11/2005 03:02 AM
Please respond to
"kevin gannon" <kevin@gannons.net>
To
"Venkatesh Palani" <kvpalani@gmail.com>
cc
"Ccie Lab (E-mail)" <ccielab@groupstudy.com>
Subject
Re: IOS command to get Bandwidth utilisation per interafce
If you have the "bandwidth" statement set correctly for the interface you
can do a "show interface" and there is a number of counters the one which
is nearest to a 5 minute average is "load" see below:
R4#show int s 0/0 | i load
reliability 255/255, txload 1/255, rxload 1/255
R4#
Its a fraction for tx and rx but handy.
Regards
kevin
On 11/11/05, Venkatesh Palani <kvpalani@gmail.com> wrote:
> HI Guys,
> I am nots uere if I am rite, I am just wondering if ther is a IOS
command
> that woudl give the bandwidth utilization for an interface.
> Thank you,
> Venkatesh
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:07 GMT-3