From: Loc Pham (loc.pham@comcast.net)
Date: Tue Nov 22 2005 - 00:53:47 GMT-3
Dave, try the 26xx router for a chance:
I have few 2611 that would do router on a stick fine with ethernet10M ( within the ccie lab of course, I would not use them in production! ).
HTH,
lP.
> Thanks, Ridney.
>
> -----Original Message-----
> From: nobody@groupstudy.com
> To: Schulz, Dave; ccielab@groupstudy.com
> Sent: 11/21/2005 10:16 PM
> Subject: Re: 2500 ethernet ....encap dot1q
>
> it is not possible with 2500 routers. the hardware (LANCE) used on these
> routers
> are not capable of doing vlan tagging/encapsulation. i've heard that
> 4500s do
> this despite having a 10mb ethernet port, but i'm not sure.
>
> ridney
>
>
>
> "Schulz, Dave" <DSchulz@dpsciences.com> wrote on 11/22/2005 11:01:42 AM:
>
> ) [image removed]
> ) Does anyone know what software level I need on a 2500 to be able to
> use
> ) ethernet subinterfaces and encapsulation dot1q?
>
> ) Dave
>
> )
> _______________________________________________________________________
> ) Subscription information may be found at:
> ) http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:07 GMT-3