From: RIDNEY_M_LAUDIANO.TTSP@ts.tsuneishi.co.jp
Date: Mon Nov 21 2005 - 22:49:51 GMT-3
please correct me if i'm wrong
1. ip ospf network point-to-point
2. redistribute connected subnets
3. summary-address ip-address mask
4. area range ip-address mask
5. redistribute via another routing protocol
am i right?
kindest regards,
ridney
John Matus <John.Matus@tokiom.com> wrote on 11/22/2005 09:18:44 AM:
) [image removed]
) well.....like any other protocol, you can affect the behavior under the
) routing protocol (net 1.1.1.0 0.0.0.255) redistributing into the protocol,
) and like you mentioned, changing the "ip o net" type under the
) interface.........i think that's it.
)
) Regards,
) John D. Matus
) Technical Support / PAS
) Fujitsu Consulting
) 626-568-7716
) John.Matus@tokiom.com
)
) pauls@hostworks.c
) om.au
) Sent by: To
) nobody@groupstudy ccielab@groupstudy.com
) .com cc
) Subject
) 10/19/2005 01:11 OSPF loopback addresses shown as
) PM real subnet
)
) Please respond to
) pauls@hostworks.c
) om.au
)
) Hi,
) I know that there are 3 ways to get loopback addresses into ospf with there
) real subnet 1 way is ip ospf network point-to-point what are the other 2?
) regards Paul
) _______________________________________________________________________
) Subscription information may be found at:
) http://www.groupstudy.com/list/CCIELab.html
) _______________________________________________________________________
) Subscription information may be found at:
) http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:07 GMT-3