From: Thomwin Chen (thomwin_chen@yahoo.com)
Date: Mon Nov 21 2005 - 21:43:39 GMT-3
I think you will need that if one of the interface you bridge involve SVI.
but if none of them are SVI, you don't need that... (bridge 1 protocol vlan-bridge)
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/1218ea1/3550scg/swfallbk.htm
Rgds,
Thomwin
Cisco Nuts <cisconuts@hotmail.com> wrote:
Hello:
If there is a requirement to bride ip traffic b/w 2 vlans (with a BVI
configuration ofcoz'), would one also require the bridge 1 prot vlan-bride
command in addition to bridge 1 prot ieee?
The solution only has the bridge 1 prot ieee cmd. but am trying to
understand when would I use one over the other?
The 3550 config guide does not really have a good example to follow.
Does anyone have a lab config or an example for a url that I could use?
Thank you.
Regards.
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:07 GMT-3