From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Sun Nov 20 2005 - 23:13:15 GMT-3
This isn't the DocCD but it should help in the lab.
Router(config)#route-map TEST permit 10
Router(config-route-map)#set ip precedence ?
<0-7> Precedence value
critical Set critical precedence (5)
flash Set flash precedence (3)
flash-override Set flash override precedence (4)
immediate Set immediate precedence (2)
internet Set internetwork control precedence (6)
network Set network control precedence (7)
priority Set priority precedence (1)
routine Set routine precedence (0)
<cr>
Router(config)#access-list 100 per tcp any any precedence ?
<0-7> Precedence value
critical Match packets with critical precedence (5)
flash Match packets with flash precedence (3)
flash-override Match packets with flash override precedence (4)
immediate Match packets with immediate precedence (2)
internet Match packets with internetwork control precedence (6)
network Match packets with network control precedence (7)
priority Match packets with priority precedence (1)
routine Match packets with routine precedence (0)
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
22Cent@gmail.com
Sent: Sunday, November 20, 2005 5:58 PM
To: Group Study
Subject: IP Precedence values
Hi Group,
I can 't seem to locate the IP precendence values( ie critical = 5 ) on
the
univecd. If anyone can point me to this that would be great.
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:07 GMT-3