From: Chris Lewis (chrlewiscsco@yahoo.com)
Date: Sun Nov 20 2005 - 00:09:58 GMT-3
Gustavo,
The show queuing interface command shows queuing statistics, if no queues have built up, WRED is not active. To verify your configuration, I like to use show queueing random int f0/0.
Chris
Gustavo Novais <gustavo.novais@novabase.pt> wrote:
Hello
Having configured WRED on interface dialer 0 like this:
Int di 0
random-detect
random-detect precedence 0 15 40
Why does it show on sh queueing interface di 0 the message
"Random-detect not active on the dialer".
Is there anything else to configure in order to make WRED active? What
does the message mean?
If I paste the same config on a Fast Ethernet interface I get the same
thing.
What am I missing here?
Rack1R4#sh queueing interface di 0
Interface Dialer0 queueing strategy: random early detection (WRED)
Random-detect not active on the dialer
Exp-weight-constant: 9 (1/512)
Mean queue depth: 0
class Random drop Tail drop Minimum Maximum Mark
pkts/bytes pkts/bytes thresh thresh prob
0 0/0 0/0 15 40 1/10
1 0/0 0/0 22 40 1/10
2 0/0 0/0 24 40 1/10
3 0/0 0/0 26 40 1/10
4 0/0 0/0 28 40 1/10
5 0/0 0/0 31 40 1/10
6 0/0 0/0 33 40 1/10
7 0/0 0/0 35 40 1/10
rsvp 0/0 0/0 37 40 1/10
Rack1R4#
Thanks
Gustavo Novais
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:07 GMT-3