From: Imal kalutotage (imal.kalutotage@gmail.com)
Date: Sat Nov 19 2005 - 05:54:54 GMT-3
you can use "ip rip send version 1" on that particular interface..
So it will summarize at the class full boundry, even though u run version 2
on the rip globaly..
HTH
Imal
On 11/18/05, Zukque <zukque@gmail.com> wrote:
>
> Guys
> In this topology:
> Network Mayor Class is 1.1.0.0/16 <http://1.1.0.0/16> <http://1.1.0.0/16>
> (OSPF NETWORK and several 1.1.x.0/24 routes)R3---- Frame-relay --- R4
> ------
> Ethernet 0/0 network 200.10.10.0/24 <http://200.10.10.0/24> <
> http://200.10.10.0/24> ---------- BB1
> R3 talking RIPv2 to R4 and R4 Talking RIPv2 with BB1, I need to summarize
> to /16, and can not use auto-summary and ip summary-address rip. How 2
> accomplish that?
> I guess that I need to create a summary address in the OSPF Network, and
> redistribute it to the RIP Network..
> Any Other Ideas?
> Thanks
> Zuke!
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:07 GMT-3