From: T. N. Noble (tn.noble@inserviceindia.com)
Date: Fri Nov 18 2005 - 19:12:57 GMT-3
From documentation cd....
Use the spanning-tree uplinkfast global configuration command to accelerate
the choice of a new root port when a link or switch fails or when the
spanning tree reconfigures itself.
Use the spanning-tree mst forward-time global configuration command to set
the forward-delay time for all multiple spanning-tree (MST) instances. The
forwarding time determines how long each of the listening and learning
states last before the interface begins forwarding.
HTH,
T. N. Noble
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of John
Matus
Sent: Saturday, November 19, 2005 1:03 AM
To: ccielab@groupstudy.com
Subject: spanning-tree equivalent command question
does
spanning-tree uplink fast
do the same thing as
spanning-tree forward- 3
Regards,
John D. Matus
Technical Support / PAS
Fujitsu Consulting
626-568-7716
John.Matus@tokiom.com
============================================================================
============================
This e-mail is intended solely for the individual to whom it is
addressed. The information contained in this transmission contains
confidential and/or proprietary information or is otherwise privileged. If
the reader of this message is not the intended recipient, please be advised
that any dissemination, distribution or copying of this transmission is
strictly prohibited. If you have received this e-mail in error, please
notify us immediately by returning it to the sender and deleting this copy
from your system. Thank you for your cooperation.
============================================================================
============================
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:07 GMT-3