From: Niche (jackyliu419@gmail.com)
Date: Wed Nov 16 2005 - 12:40:46 GMT-3
Hi there,
FYI,
http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide
09186a00801a75a7.html
Cheers~
Jacky
On 11/16/05, Chula Bandara <chula_bandara@hotmail.com> wrote:
>
> HI Jack i am trying tclsh on a 2811 , it doesn't work. do i need a
> specific IOS version.
>
> Thanks
>
> Chula
>
> test#tclsh
> Translating "tclsh"
>
> Translating "tclsh"
> % Unknown command or computer name, or unable to find computer address
> test#sh ver
> Cisco IOS Software, 2800 Software (C2800NM-IPBASE-M), Version 12.4(3a),
> RELEASE SOFTWARE (fc2)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2005 by Cisco Systems, Inc.
> Compiled Fri 30-Sep-05 13:24 by hqluong
>
> ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)
>
> test uptime is 1 week, 5 days, 19 hours, 18 minutes
> System returned to ROM by reload at 19:57:22 UTC Thu Nov 3 2005
> System image file is "flash:c2800nm-ipbase-mz.124-3a.bin"
>
> ------------------------------
> From: *Niche <jackyliu419@gmail.com>*
> Reply-To: *Niche <jackyliu419@gmail.com>*
> To: *InderpalS@mindscapeit.com*
> CC: *cciebfetzer@gmail.com, ccielab@groupstudy.com*
> Subject: *Re: TCL Scripts*
> Date: *Wed, 16 Nov 2005 13:19:22 +0800*
> Hi there,
>
> Yes, from my lab experience, all routers (2600&3600) (except 3550) can run
> the tcl script,
>
> Sample that I used in the lab,
>
> tclsh
> foreach addr {
> 1.1.1.1 <http://1.1.1.1> <http://1.1.1.1>
> 2.2.2.2 <http://2.2.2.2> <http://2.2.2.2>
> x.x.x.x
> } {ping $addr}
>
> write this script on notepad, then paste it on each router for ping check
> then input "tclq" to make sure you return to normal command mode.
>
> Find a router and try it once or twice, you will know. It's actually
> pretty
> easy to get used to it.
>
> Cheers~
> Jacky
>
> On 11/16/05, InderpalS@mindscapeit.com <InderpalS@mindscapeit.com> wrote:
> >
> > Hi Bryan,
> >
> > Still can't get this....how do we actually make use of TCL scripts in
> real
> > ccie lab for testing. Does tcl script run ona ll lab routers? Do we need
> > to
> > write entire script before we can use it?
> >
> > Thanks for your help..
> > Inder
> >
> > -----Original Message-----
> > From: Bryan Fetzer [mailto:cciebfetzer@gmail.com]
> > Sent: Tuesday, November 15, 2005 7:10 PM
> > To: ccielab@groupstudy.com
> > Subject: Re: TCL Scripts
> >
> > One such example that I am aware of:
> > http://www.internetworkexpert.com/resources/tclshrsh.htm
> >
> > Inderpal Singh wrote:
> >
> > >Could someone shed some light on usage of TCL scripts to check / test
> > >configuration. May be some good url or few nice steps.
> > >
> > >Inder
> > >
> > >-----------------------------------------------------------------------
> > >-
> > >
> > >Don't just search. Find. MSN Search Check out the new MSN Search!
> > >
> > >_______________________________________________________________________
> > >Subscription information may be found at:
> > >http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> > 11/16/2005 9:02:12 AM
> >
> > Disclaimer
> >
> >
>
>
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:07 GMT-3