From: Schulz, Dave (DSchulz@dpsciences.com)
Date: Wed Nov 16 2005 - 12:07:51 GMT-3
It is working.....after doing the reboot shuffle. ;-)
Dave Schulz,
Email: dschulz@dpsciences.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Schulz, Dave
Sent: Wednesday, November 16, 2005 9:23 AM
To: ccielab@groupstudy.com
Subject: virtual links directly form at Cat
I am wondering if anyone has ever tried to do OSPF through a CAT switch
with a virtual link. Due to the limitations of my lab...I was done some
"work arounds" and tried to do a virtual link originating from a
Catalyst to a router. The VL would come up, but it would not allow the
extension of the area 0 to the remote site (IOW, I have two separate
DBs). The CAT is a 4224 running 12.2 (2). [the router with the other
virtual link is router 10.10.10.10]
interface Vlan 40
ip address 172.16.16.100 255.255.255.0
ip ospf network non-broadcast
ip ospf hello-interval 5
ip ospf priority 40
ip mroute-cache
!
interface Vlan 900
ip address 172.16.67.100 255.255.255.0
ip ospf network non-broadcast
ip ospf priority 255
ip mroute-cache
!
router ospf 1
router-id 100.100.100.100
log-adjacency-changes
passive-interface default
area 16 virtual-link 10.10.10.10
no passive-interface Vlan 40
no passive-interface Vlan 900
network 172.16.16.0 0.0.0.255 area 16
network 172.16.67.0 0.0.0.255 area 67
neighbor 172.16.67.7
neighbor 172.16.16.1
neighbor 172.16.16.6
Dave Schulz
Email: dschulz@dpsciences.com <mailto:dschulz@dpsciences.com >
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:07 GMT-3