From: Niche (jackyliu419@gmail.com)
Date: Tue Nov 15 2005 - 21:45:34 GMT-3
Hi Dave,
I was having the same question as you when I was doing this question. After
I finished this question, I figured out what was the real meaning of "read
the whole lab before you start working on the lab's task". =)
As far as I can remember, you have to put that interface in EIGRP (something
like Section 6) then redistribute it into OSPF (something like Section 4 or
5) to achieve the task.
Cheers~
Jacky
On 11/16/05, Schulz, Dave <DSchulz@dpsciences.com> wrote:
>
> Yes, that is what James and Paul suggested as the only other option.
>
>
>
>
>
> Dave Schulz,
>
> Email: dschulz@dpsciences.com <mailto:dschulz@dpsciences.com%20>
>
>
>
> ________________________________
>
> From: milo_az@yahoo.com [mailto:milo_az@yahoo.com]
> Sent: Tuesday, November 15, 2005 5:02 PM
> To: Schulz, Dave; James Matrisciano; ccielab@groupstudy.com
> Subject: RE: Redistribution option (NMC Lab#1- 1.3.4)
>
>
>
> Redistribute from another routing protocol?
>
>
>
> Mike
>
> "Schulz, Dave" <DSchulz@dpsciences.com> wrote:
>
> Thanks, James....now you really have me
> thinking....hmmmmm.....how would
> it be possible to add an interface (or loopback) into ospf,
> outside of
> ospf? I was thinking about using a route-map, but this still
> must be
> redistributed. And, the distribution-list will not work in this
> case.
> I also tried a summary address. After going through the doc CD
> on
> redistribution methods, I am out of ideas. Are we sure that this
> is
> not broken?
>
>
> Dave Schulz,
> Email: dschulz@dpsciences.com
>
>
>
> -----Original Message-----
> From: James Matrisciano [mailto:jmatrisciano@kenttech.com]
> Sent: Tuesday, November 15, 2005 4:09 PM
> To: Schulz, Dave; ccielab@groupstudy.com
> Subject: RE: Redistribution option (NMC Lab#1- 1.3.4)
>
> Think "out of the box" or in this situation, "out of OSPF".
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of
> Schulz, Dave
> Sent: Tuesday, November 15, 2005 4:06 PM
> To: ccielab@groupstudy.com
> Subject: Redistribution option (NMC Lab#1- 1.3.4)
>
> I am working with an NMC lab that requires to add a loopback
> into
> ospf.....the lab states, "advertise the loopback address in OSPF
> from R3
> without adding it in any ara and without redistribution
> connected
> prefixes. It should appears in the routing tables of the other
> routers". If we don't use the area command, and can't use the
> redistributed connected....then what other options exist? I
> can't seem
> to locate any other options on this. Is this an error (or
> mis-interpretation)? Anyone have a hint?
>
>
> Dave Schulz,
> Email: dschulz@dpsciences.com
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
> ________________________________
>
> size=1 width="100%" align=center>
>
> Yahoo! FareChase - Search multiple travel sites in one click.
> <http://us.lrd.yahoo.com/_ylc=X3oDMTFqODRtdXQ4BF9TAzMyOTc1MDIEX3MDOTY2OD
> gxNjkEcG9zAzEEc2VjA21haWwtZm9vdGVyBHNsawNmYw--/SIG=110oav78o/**http%3a/f
> arechase.yahoo.com/ <http://arechase.yahoo.com/>>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:06 GMT-3