From: Kumar Raja-Q16843 (Raja.Kumar@motorola.com)
Date: Tue Nov 15 2005 - 15:11:23 GMT-3
Hi Guys,
In rate-limiting , I have this question, a CIR of 10 Mbps with a normal
burst of 500 kbps and a maximum burst of 1 Mbps, the traffic should pass
if the set condition matches if not the packet be dropped.
Interface Ethernet0/0
ip address 10.10.10.1 255.255.255.0
rate-limit input 10000000 62500 125000 conform-action transmit
exceed-action drop
Kindly advice if my configuration is correct, the above solution is
because I was given the normal burst value of 500 kbps, but actually we
don't need this value, if we are given with the CIR and the normal burst
can be calculated as (CIR*1.5/8), when the value of normal burst is
explicitly given, should we use or we still go ahead and calculate the
normal using the formula.
Thanks in advance,
Raja
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:06 GMT-3