IE Workbook

From: Jason Edelman \(jaedelma\) (jaedelma@cisco.com)
Date: Mon Nov 14 2005 - 12:55:17 GMT-3

• Next message: Jerricho Grivano: "rate-limit in Ethernet or FastEthernet"
• Previous message: simon hart: "RE: Priority Queuing question"
• Next in thread: John Matus: "Re: IE Workbook"
• Maybe reply: John Matus: "Re: IE Workbook"
• Maybe reply: Brian McGahan: "RE: IE Workbook"
• Maybe reply: Tim: "RE: IE Workbook"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Several of the IE examples have configurations to setup SNMP traps to a
specific server. In some, there is the command "snmp-server enable
traps' and some there are not.

Question: When only asked to configure a router to send traps to a
specific server, should I use the command 'snmp-server enable traps' to
enable traps globally or just use the snmp-server host command?

2nd Question: When asked to send specific traps to a server,
example=hsrp, is it required to use the snmp-server enable traps hsrp
command as well as snmp-server host x.x.x.x STRING hsrp

Thanks,

Jason

• Next message: Jerricho Grivano: "rate-limit in Ethernet or FastEthernet"
• Previous message: simon hart: "RE: Priority Queuing question"
• Next in thread: John Matus: "Re: IE Workbook"
• Maybe reply: John Matus: "Re: IE Workbook"
• Maybe reply: Brian McGahan: "RE: IE Workbook"
• Maybe reply: Tim: "RE: IE Workbook"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:06 GMT-3