From: milo_az@yahoo.com
Date: Mon Nov 14 2005 - 11:39:29 GMT-3
Use a Menu in addition to the privilege commands.
Mike
"Jason Edelman (jaedelma)" <jaedelma@cisco.com> wrote:
After taking a class with IE, I've found out there is no way to specify
a particular interface.
HTH
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
kevin gannon
Sent: Tuesday, November 08, 2005 2:46 AM
To: mani poopal
Cc: Cisco certification
Subject: Re: Priv levels
That will allow the change to be made to all interfaces on the
box and not just Serial 0/0 say no ?.
Thanks & Regards
Kevin
On 11/7/05, mani poopal wrote:
> Hi Kevin,
>
> Try these commands.
>
>
>
> Privilege exec leve 1 configure t
>
> Privilege configure level 1 interface
>
> Privilege interface level 1 description
>
>
>
> Mani
>
>
> kevin gannon wrote:I am trying to configure using
priv levels so that a user can only configure
> "interface serial 0/0" and then change says its description. I have
tried
>
> privilege interface level 1 ip address
> privilege interface level 1 ip
> privilege configure level 1 interface
> privilege exec level 1 configure
>
> What I am missing is the magic to only allow Serial 0/0 to be
> configured ?
>
> Regards
> Kevin
>
>
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:06 GMT-3